ACTUATORS
Specification ""
Male connection for rubber hose Φint 10 | Gas Inlet |
Male connection for rubber hose Φint 6 | Gas Outlet |
3.0 bar (0,3 Mpa) | Maximum working pressure |
47 cc/inj ± 3% (at 20 msec and 2,5 bar) |
Flow rate |
2,0 bar (reducer outlet pressure) | Inlet pressure |
2.8 ms | Minimum opening time |
Temperature sensor signal | Electrical output |
4xcoil - 4x AMP superseal 2 way male contact | Electrical input connection |
3 Ohm | Injector coil nominal resistance |
4/1 A | Injector control electrical current |
10 bar | Burst pressure |
External leak rate < 15 cc/h | Gas seal requirement |
Union for gas pressure measure | Present – union with φ4/5 fitting for rubber pipe |
Injectors temperature sensor | Present-2 way FCI sicma2 connector with female contact |
Environment: -40 / +120 °C | Working temperature |
Well fastened on the engine, closed to the intake manifold. Solenoid valves in vertical position. Injection nozzles fastened as close as possible to the cylinders inlet valves and/or petrol injectors. Gas hoses from injection rail to nozzles having same length, the shortest. |
Position inside the vehicle |
62 x 158 x 59 | Overall dimensions (mm) |
200g | Weight |
R110.00 | Homologations |